• Female
  • 18/02/1972
  • Followed by 0 people
Recent Updates
  • UV Printed PVC Sheet-Knowledge About PVC Sheet

    Polyvinyl chloride (PVC) is yellowish translucent in nature and shiny. Transparency is better than polyethylene and polypropylene, but worse than polystyrene. Depending on the amount of additives, it is divided into soft and hard polyvinyl chloride. Below polypropylene, whitening occurs at the inflection point. Common products: plates, pipes, soles, toys, doors and windows, wire covers, stationery, etc. It is a polymer material that uses a chlorine atom to replace a hydrogen atom in polyethylene.

    General properties PVC resin is a white or light yellow powder with a relative density of 1.35-1.45. The degree of hardness of the product can be adjusted by adding plasticizers.

    Mechanical properties PVC has high hardness and mechanical properties. It increases with increasing molecular weight, but decreases with increasing temperature. The rigid PVC has good mechanical properties, and its elastic modulus can reach 1500-3000MPa. The elasticity of soft PVC is 1.5-15 MPa. But the elongation at break is as high as 200% -450%. The friction of PVC is average, the static friction factor is 0.4-0.5, and the dynamic friction factor is 0.23.

    Thermal properties The thermal stability of PVC is very poor, it starts to decompose at 140 ℃, and the melting temperature is 160 ℃. The coefficient of linear expansion of PVC is small, it is flame-resistant, and its oxidation index is over 45. Therefore, heat stabilizers need to be added during processing to ensure product performance.

    Electrical properties PVC is a polymer with better electrical properties, but due to its greater polarity,
    Electrical insulation is not as good as PP and PE. The dielectric constant, the dielectric loss tangent value and the volume resistivity are large, and the corona resistance is not good. It is generally suitable for low-voltage and low-frequency insulation materials.
    Environmental properties PVC is resistant to most inorganic acids, alkalis, salts, and most organic solvents. Suitable for medicine and chemical anticorrosive materials.

    Features of our UV printed PVC board:
    Product color: white or other colors,

    Size: 1220mm * 2440mm, thickness: 1mm ~ 30mm, density: 0.40 ~ 0.80g / cm3

    Packing: PE bag, carton or wooden pallet.

    It also supports LOGO customization, packaging customization, and pattern customization.

    Hangzhou Jianguan Plastic Industry Co., Ltd. is a professional China manufacturer and supplier of UV print pvc board . Welcome to purchase: https://www.foamboardpvc.com/product/uv-print-pvc-foam-board.html
    UV Printed PVC Sheet-Knowledge About PVC Sheet Polyvinyl chloride (PVC) is yellowish translucent in nature and shiny. Transparency is better than polyethylene and polypropylene, but worse than polystyrene. Depending on the amount of additives, it is divided into soft and hard polyvinyl chloride. Below polypropylene, whitening occurs at the inflection point. Common products: plates, pipes, soles, toys, doors and windows, wire covers, stationery, etc. It is a polymer material that uses a chlorine atom to replace a hydrogen atom in polyethylene. General properties PVC resin is a white or light yellow powder with a relative density of 1.35-1.45. The degree of hardness of the product can be adjusted by adding plasticizers. Mechanical properties PVC has high hardness and mechanical properties. It increases with increasing molecular weight, but decreases with increasing temperature. The rigid PVC has good mechanical properties, and its elastic modulus can reach 1500-3000MPa. The elasticity of soft PVC is 1.5-15 MPa. But the elongation at break is as high as 200% -450%. The friction of PVC is average, the static friction factor is 0.4-0.5, and the dynamic friction factor is 0.23. Thermal properties The thermal stability of PVC is very poor, it starts to decompose at 140 ℃, and the melting temperature is 160 ℃. The coefficient of linear expansion of PVC is small, it is flame-resistant, and its oxidation index is over 45. Therefore, heat stabilizers need to be added during processing to ensure product performance. Electrical properties PVC is a polymer with better electrical properties, but due to its greater polarity, Electrical insulation is not as good as PP and PE. The dielectric constant, the dielectric loss tangent value and the volume resistivity are large, and the corona resistance is not good. It is generally suitable for low-voltage and low-frequency insulation materials. Environmental properties PVC is resistant to most inorganic acids, alkalis, salts, and most organic solvents. Suitable for medicine and chemical anticorrosive materials. Features of our UV printed PVC board: Product color: white or other colors, Size: 1220mm * 2440mm, thickness: 1mm ~ 30mm, density: 0.40 ~ 0.80g / cm3 Packing: PE bag, carton or wooden pallet. It also supports LOGO customization, packaging customization, and pattern customization. Hangzhou Jianguan Plastic Industry Co., Ltd. is a professional China manufacturer and supplier of UV print pvc board . Welcome to purchase: https://www.foamboardpvc.com/product/uv-print-pvc-foam-board.html
    China UV Printing PVC Board Company & Wholesaler
    Hangzhou Jianguan Plastic Industry Co., Ltd. wholesales high-quality UV printing PVC board, the products are sold all over the world, bringing zero formaldehyde to the living environment.
    WWW.FOAMBOARDPVC.COM
    1
    0 Comments 0 Shares
More Stories