1. When using the plastic bucket heat transfer machine, the pressure and temperature must be adjusted first.

  We should debug the pressure gauge of the plastic bucket heat transfer machine according to the actual situation of the substrate, and debug the temperature gauge of the heat press according to the actual situation.

   2. Heating the boiler to preheat the equipment, the preheating time is about 60 minutes.

   3. After the hot press reaches the specified temperature, spread the glue on the wood surface evenly.

  4. Put the glued wood on the workbench of the heat press, place it steadily, close the heat press, start the heat press, after the specified time, lower the heat press, take out the pressed wood and lay it flat.

  5. Sort the finished wood after hot pressing and arrange them neatly.

If you are interested in hot stamping foil, welcome to contact us!