Wholesale Planting Machine is not only suitable for large-area planting, but also suitable for transplanting seedlings in hills and greenhouses. It has the advantages of good manufacturability, better performance, simple operation and maintenance, relatively high efficiency, relatively low energy consumption, and long use time. When the transplanter is working, it should be used in the soil behind the rotary harrow, otherwise it will damage the machine.

   1. Before transplanting, check and maintain the tractor according to the requirements of the operation manual.

   2. The pepper transplanter should be carefully inspected and maintained in accordance with the instructions before use.

   3. The user understands the characteristics and precautions of the transplanter before operation.

  4. Check every 4 hours to ensure the use under normal technical conditions.

   5. It is prohibited to work when reversing or turning on the ground.

   6. When the machine is running, please stay away from the articulated increase area.

  7. When checking the parts of the pepper transplanter or repairing, stop the machine to prevent damage to the maintenance personnel.

  Whether it is during use or idle period of Seeding Machine manufacturers pepper transplanter, the machine must be lubricated. When using lubricating oil, we need to pay attention to some requirements, including 6 major requirements.

   1. Fill the harvester with lubricating oil in strict accordance with the time period, grease type and location in the manual.

  2. When adding lubricating oil, the equipment used should be clean. Before lubricating, the grease and dust on the grease nipple, refueling port and lubricating parts should be cleaned.

   3. Frequently check the working temperature of bushings, bearings and other friction parts. If the oil seal leaks and the working temperature is too high, it should be lubricated.

   4. The sprocket and chain should be lubricated in the stopped state, and the grease on the chain should be cleaned when lubricating, and the oil should be evenly brushed.

  5. Lubricate the release bearing and sleeve of the driving clutch after disassembly, generally once a year.

   6. After the harvester is running or running for a long time, the gear oil, engine oil, dirty oil, etc. should be changed or filtered before use. Generally check once a week. If oil leakage or insufficient oil level is found, add it.

   Adding lubricating oil to the pepper transplanter is a relatively important maintenance step. This step can also make it a long time to use, so you must master these requirements when refueling.