Electric curtains are a widely used smart home, so, Motorized Shades Blinds Factory introduces how to install electric curtains!

1. The accuracy of positioning is the key to the installation of the electric curtain track. First, the fixed hole spacing and the dimensions of the required mounting rails must be measured. It should be noted that the overall length of the track is the sum of the electric motor, track and auxiliary gearbox.

2. Install the hoisting clip, rotate the clip 90 degrees to connect with the electric curtain track, and then use the self-tapping screw to install the hoisting clip on the top plate. If it is a concrete structure, it needs to be fixed with expansion screws.

3. Connect the motor and the track, put the motor in the main gear box, and turn it 90 degrees clockwise. The interface between the pan shaft of the main gearbox and the motor should match. Once rotated into place, push the insert into the gearbox as far as it will go, at which point it will automatically lock.

4. Adjust the motor program, the rear end of the motor is equipped with a set of gears and a micro switch device. The motor wiring needs forward and reverse rotation to achieve self-positioning of the curtain opening and closing stroke.

Through the above introduction, Roller Shutter Tubular Motor Wholesaler hopes that you can simply refer to the content of this article in future use.