Tiling applies tiles to a surface but is most commonly used on floors and walls. Be it the construction of a new structure or the same renovation. Nowadays, several trends have taken over the market of traditional tiles made out of ceramic, cement, granite etc.; various Melbourne Tiling services have a wide variety of services. Out of such services, the most crucial one is the bathroom tiling. This is a daunting task as the quality has to be the finest because the materials being used will be exposed to water continuously, along with different degrees of temperature.

Considering Melbourne's one of the finest tiling companies, Affordable Tiling & Co., has a great reputation in this field of work. They have a team of exceptionally talented tilers who are proud to deliver perfect lines and levels for almost all surfaces. Whether you need internal or external tiles for walls or floors, their team can get the job done with their exemplary Melbourne Tiling skills. Before tiling your bathroom, envision how you want the outcome to look. Plan ahead for any features you want to stand out and what you want to hide.

Bathroom Tiling

The process of Bathroom Tiling Melbourne can be simplified into certain steps, such as:

  • When tiling a bathroom, the easiest method is to install the floor tiles first, then go for the wall tiles. It is best to centre the tiles so that the cuts on the perimeter are even. This can be achieved by measuring the total distance from one wall to the opposite wall at one end of the room, halve this figure then mark the centre point on the floor. Repeat this process at the other end of the room.
  • After mixing the tile adhesive, place a small amount of the adhesive on the surface at your starting point using a notched trowel. Be careful not to cover your marked lines. It is important only to spread a little amount of adhesive at a time to avoid it skinning over and becoming ineffective.
  • As you place the tiles along the marked line, push firmly on each tile to achieve consistent adhesive coverage. Insert tile spacers into the joints between each tile laid. It is recommended to clean the joints of any excess adhesive as you go to make grouting easier. When you reach the edges, measure and cut your tiles accordingly.
  • Using a spirit level, run a level line around the room from this mark. Next, pick the edge of one of your full floor tiles and mark this line plumb up the wall. You now have your level and plumb lines to begin tiling your bathroom walls.
  • After leaving your bathroom tiles for 24 hours to set, carefully remove all tile spacers and wedges. Clean any excess adhesive from tiles and joints. Mix your desired colour of grout according to the manufacturer's instructions. Using your grout float, push your grout evenly and firmly into each joint, ensuring that the grout is flush with the tile. After 5 – 10 minutes of setting time, wipe the completed section with a wrung-out wet sponge, rinsing the sponge regularly as you go.
  • Twenty-four hours after grouting the bathroom, clean, damp cloth can be used to remove any excess grout haze. Internal tile joints between wall and wall or wall and floor should be finished with a kitchen and bathroom silicone sealant.

Conclusion

Affordable Tiling & Co. is well-known, and their reputation precedes their range of assistance for offering exceptional services like Bathroom Tiling Melbourne. Their team of skilled tilers can help you achieve the perfect finish for your bathroom floors and walls, whether you're looking for traditional tiles or something more modern. Their Melbourne Tiling services are outstanding in every aspect.