HP OfficeJet Pro 6830 Stopped Working
The HP OfficeJet Pro 6830 is one of the most popular and bestselling printer models of HP. This printer is an all-in-one device and can be used to scan copy and fax documents. It also has enhanced wireless printing and two-sided duplex printing features along with a color touch screen and the Instant Ink ready option that can tell you exactly when the ink level is running low. But though it has such amazing features the HP OfficeJet Pro 6830 does encounter technical errors that cause it to stop working. IF you are not sure what to do you can call the HP Customer Service Number (+1) 877-771-7377 and reach out to an expert to get more information. You can also read the article given below since it has some basic troubleshooting steps you can use to fix the problem.
Solution 1: HP Print and Scan Doctor:
Whenever you encounter an error on HP OfficeJet Pro 6830 you can always use the HP Print and Scan doctor to check if you can automatically fix the printer error. You can download this diagnostic tool from the HP Support home page. Once you download the tool you just need to run it on your computer and respond to the instructions on the screen to fix the problem. However, the HP Print and Scan doctor will only work with certain operating systems. If this tool is not able to fix the HP OfficeJet Pro 6830 error you can try the other two solutions given below.
Solution 2: Check the Ink Cartridges:
The HP Printer error C4EBA341 is very often caused on account of the incorrect installation of the HP ink cartridges. To fix the problem you will have to open the cartridge door when the printer is on. Allow the ink cartridge to shift to the right and then disconnect the power cord. You will now need to turn off the wireless router and completely shut down your computer. Now carefully remove the ink cartridges and replace them after about 30 seconds. Reconnect the power cable and turn the router back on. Give the command to print a test sheet using your HP OfficeJet Pro 6830 and see if the problem is resolved.
Solution 3: Printer Reset:
If both these solutions do not work then you will have to reset your HP OfficeJet Pro 6830 printer. To do this you will have to turn off the computer, the printer and the router. Disconnect all the power cables from the printer and the computer. Wait for about 5 minutes and restart your devices one at a time. Carefully reconnect all the cables in their respective ports and try to print a document.
If the problem still persists then you should check to see if there are any firmware or printer driver updates that need to be completed. If you are not familiar with how to update the printer drivers on your HP OfficeJet Pro 6830 you can call the HP Customer Service Number (+1) 877-771-737 and ask your additional tech support.