How to Fix HP LaserJet Pro Printers Scanner Error 22

With HP Printers, you will get a high-quality printing experience as you’ve never thought. The developers of HP products are consecutively enhancing their designs with a mindset to put across the new specifications and advanced features.

By doing the progressive advancements, HP has achieved a maximum customer satisfaction rate, which in itself is evidence of the company’s integrity and respect. However, there might be some issues that will break your trust in HP Products. One of the major issues is known as “scanner error 22” which could result in discontinuation of scanning features in your HP LaserJet Pro Printers.

What HP printers are capable of with LaserJet technology?

It is the general view of many HP customers that HP Printers serve as the best products among the most influential competitors in the market. That’s why it is one of the most compliant devices that integrate with the latest tech devices. IT means that you can print a copy or give commands via multiple devices using a wireless network through mobile, laptop, and computers as well as support wireless printing.
 
Moreover, you may get standard quality prints. It does not matter for you to receive scanning and printing outputs by following up some standard guidelines. The HP LaserJet printer is much better than the traditional ones as the printing of the LaserJet is actually based on the high dot per inch, which results in a good and a clear picture without getting pixilated.

What is the specific cause of the invasion of Scanner Error 22?

The hard copy of any document will turn into the electronic data when it comes to scanning the particular file. It is quite a disappointing fact that you have to apply the photograph to get pleasing outputs. As soon as you apply the photograph for scanning an error message occurs- HP LaserJet Pro Printers Scanner Error22 on the control panel of the printer.

You should not be in a ‘No Work’ mode if your printer is.

The main reason behind the Scanner error 22 is the additional weight or pressure you apply on the scanner glass. The moment you open a heavyweight document or file for scanning one page, the error occurs. Nobody should be on a static mode to work even your HP LaserJet Printer encounters with it.
 
However, if your printer is having the Scanner error 22, you need not compromise with the ill effects of the same. The implementation of the error-free technology and advanced tricks will explain the right way to recover your printer from Scanner error 22.

How can you eliminate Scanner Error 22 in the HP Laser printer?

 

In order to fix the error, you can follow the steps mentioned below:-

 
  • Turn on your HP printer in case it is not active.
  • Wait for a minute, unless the printer is in the active phase.
  • The moment you turn on the printer, it is recommended to disconnect the power plug from the back side of the printer.
  • Now, you must unplug the power cord from the wall socket.
  • Wait for at least 60 seconds.
  • Plug in the power cord again in the wall socket.
  • Reconnect the power cord with the back side of the panel.
  • You need to turn on the HP LaserJet printer when you have disabled the auto run.
  • Wait until the HP printer is idle. The scanner is fixed now and good to go.

Wrapping up:-

It is common if you have encountered with HP Printer Scanner error 22. For such situations, you should consider the steps mentioned above. If you are amongst those who are still facing issues with the scanning process, you can get connected to the experts and software technicians available on HP Support Center by dialing HP Customer Service Number +1-877-771-7377.
 

 

Read Related Article Also: