Grooved pipe is a kind of rolled and rolled pipe with grooves, which are usually round grooved pipe, oval grooved pipe, BOPP labels, etc., because the pipe section can see the obvious groove, it is named the grooved pipe . Such pipes can cause fluids to flow away from the wall surfaces of these turbulent structures to generate flow detachment zones, and form vortices of different strengths and sizes. It is these vortices that change the flow structure of the fluid and increase the turbulence in the near-wall region, thereby increasing the convective heat transfer film coefficients of the fluid and the wall.
a. Rolled grooved tube Rolled grooved tube is a horizontal or spiral groove with a certain pitch and depth rolled from the outside of the circular tube according to the design requirements. A convex horizontal rib or spiral rib is formed on the inner wall of the tube, as shown in the right .
Such a groove on the outer wall of the pipe and a protrusion on the inner wall can simultaneously enhance the heat transfer of the fluid on the inner and outer sides of the pipe, and are particularly suitable for strengthening the heat transfer of the single-phase fluid inside the pipe and enhancing the pipe External fluid vapor condensation and liquid film boiling heat transfer.
b. Spiral grooved tubes are available in single-pass and multi-pass spirals. After forming the spiral groove tube, there is a groove with a certain spiral angle, and the tube has corresponding convex ribs. The spiral groove should not be too deep, the greater the deep flow resistance of the groove, the larger the spiral angle, the larger the heat transfer film coefficient of the groove tube. If the fluid can rotate along the groove, the number of threads has little effect on heat transfer.
c. The grooved tube is continuously rolled with variable cross-section. A lateral groove intersecting at 90 ° with the tube axis is formed outside the tube, and a lateral convex rib is provided inside the tube. After the fluid flows through the convex ribs in the tube, no spiral flow is generated, but an axial vortex group is generated along the entire cross section to enhance the heat transfer. The horizontally threaded pipe also has a great strengthening effect on the film boiling heat transfer of the fluid in the pipe, which can increase the boiling heat transfer coefficient by 3-8 times.
Search
Categories
- Economy
- Blog
- Article
- Art
- Causes
- Crafts
- Dance
- Food and Drinks
- Movies & Films
- Health & Fitness
- Software & Games
- Home & Gardening
- Literature
- Music
- Networking
- Other
- Party
- Religion
- Shopping & e-Commerce
- Sports
- Theater
- Wellness
- Nepal & Nepalese
- South-east Asia
- e-Sathi
- Technology
- Politics & Politicians
- Photography
- Business
- Develops
- Information Technology
- News
- Animal and Pets
- Climate change & Global Warming
- Travel & Tourism
- Educations
Read More
How To Use BOPP Labels
Main Category EditorMainly used in liquid washing products and popular personal care products;...
How to use ISO 13485:2016 to manage implantable medical devices in Oman?
ISO 13485 Certification in Oman is an association has done an ISO 13485 Medical Device...
Fakta-fakta dari Lirik Lagu Cinta Sampai Mati - Kangen Band
Kangen Band kembali merilis karya terbarunya dengan lagu Cinta Sampai Mati yang berhasil...
Surethik Thickening Fiber - Best Hair Products Vancouver
Due to increasing awareness of the health hazards associated with the chemical composition of...
ड्राइभिङ लाइसेन्सको आवेदन अनलाइनमा, तर पैसा बुझाउन कार्यालयमै जानुपर्ने
काठमाडौं । सवारी चालक अनुमतिपत्रको अनलाइन आवेदन दिँदा त्यस वापतको रकम भुक्तानी गर्नका लागि भने...