The epdm extruder comes with an anti-wear coated barrel-and-screw combination.epdm extruder has better heat transfer which results in shorter cure times at higher temperatures.The number of uncrosslinked sulfur atoms is Sx or Sy) determines the degree of vulcanization of the rubber.Desired level of heat can be maintained by hot air heaters or rubber curing oven.

  These salt bath curing line are used to cure these coatings or other materials onto the parts.As better quality control, optimization of materials in the mix design, and high-performance concrete are specified for salt bath curing line.Textile reinforced hydraulic salt bath curing line are rated for lower pressures than steel reinforced hoses.salt bath curing line is also delivered below the salt bath curing line, heating the entire perimeter of the extrusion evenly.