We are a mold manufacturer and Paint Pail Mould is one of our products.

Regarding the inspection of barrel mold products, it is generally necessary to do a test of a drop test barrel at a height of 1.5 meters. I would like to introduce something about the drawing barrel drop test.

For the paint bucket strength test, we must consider three points:

  1. The bucket and lid must be well assembled, otherwise, the lid will fall separately and after leaking paint;
  2. The wall thickness of the barrel should be reasonable. Some people always want to reduce the thickness of the barrel to reduce costs. Such quality is difficult to guarantee, and a reasonable thickness can ensure quality while saving costs.
  3. Material selection: This is very important. People usually use high-density polyethylene or polypropylene materials to produce barrels, but there are many kinds of materials for each. It is best to choose a higher hardness, better cold resistance, and heat Made of materials with low deformation temperature because it can provide better impact resistance.

In addition, the 20L Pail Mould is also our product, welcome to consult and purchase.