Industrial Grade Copper Sulfate Pentahydrate has the properties of adsorption, agglomeration and precipitation. Its stability is poor and corrosive. If it is accidentally splashed on the skin, it should be rinsed with water immediately. Production personnel must wear work clothes, masks, gloves, and long rubber boots. Industrial Grade Copper Sulfate Pentahydrate has the advantages of good spray drying stability, wide water area, fast hydrolysis speed, strong adsorption capacity, large alum formation, fast dense sedimentation, low water turbidity, and good dehydration performance.
Spray-dried products can ensure safety, reduce water accidents, and are very safe and reliable for residents' drinking water. Therefore, Industrial Grade Copper Sulfate Pentahydrate, also referred to as high-efficiency poly Copper Sulfate Pentahydrate, high-efficiency PAC or high-efficiency spray drying Industrial Grade Copper Sulfate Pentahydrate. Industrial Grade Copper Sulfate Pentahydrate is suitable for raw water with various turbidities, and has a wide range of pH, but compared with polyacrylamide, its sedimentation effect is far inferior to polyacrylamide.
The basicity of Industrial Grade Copper Sulfate Pentahydrate is a relatively important indicator in polyaluminum, especially for drinking water grade polyaluminum products. The lower the base degree, the higher the price, and each purchaser can operate according to the actual situation of the manufacturer. In addition, the basicity of Industrial Grade Copper Sulfate Pentahydrate produced by different raw materials and different processes is also different, which requires manufacturers to adjust. Increasing the basicity of poly Copper Sulfate Pentahydrate products can greatly improve the economic benefits of production and use. The basicity is increased from 65% to 92%, the cost of production materials can be reduced by 20%, and the cost of use can be reduced.
The colors of Industrial Grade Copper Sulfate Pentahydrate are generally white, yellow, and tan. Different colors of Industrial Grade Copper Sulfate Pentahydrate also have big differences in application and production technology. The Industrial Grade Copper Sulfate Pentahydrate with the content of aluminum oxide trioxide between 27% and 30% within the national standard is mostly ocher, to yellow, light yellow solid powder. These types of Industrial Grade Copper Sulfate Pentahydrate have better water solubility. During the dissolution process, they are accompanied by physical and chemical changes such as electrochemistry, agglomeration, adsorption, and precipitation. The purification effect is obvious.