It belongs to the category of enameled magnet wire, usually refers to insulated wires, electrical products used to make coils or windings. Also called winding wire. The copper magnet wire conductor is coated with the corresponding coating solution, and then it is made by solvent evaporation, curing in an oven, and cooling.

The insulating enameled varnish they use can be divided into polyester enameled wire, polyester imide enameled wire, polyamideimide enameled wire, polyimide enameled wire, polyesterimide/polyamideimide enameled wire resistance, corona Silk and oil paint, acetal paint, polyurethane enameled wire.

Magnet wires are copper wires with a thinner enamel insulation, rather than the usual thicker plastics.

You can use ordinary copper wire with plastic insulation, but the winding has the most turns. It will work, but it is not efficient.

The conductivity of the two wires is the same, but the electromagnetic copper wire is specially coated with a thin and high heat-absorbing material. The thin insulating material helps to make more turns in a short area and has the ability to absorb heat. Ordinary copper wire is insulated with thicker materials and may require more area to wind more turns. Therefore, the winding will not work efficiently and will melt the insulation in the heat.

Magnet wires are coated with enamel insulation instead of plastic or rubber coating. This makes the insulating layer thinner and allows a more compact winding, which makes the magnetic field in the coil denser.

The wire diameter of the magnet wire is also thinner, which is a comparison between a solid wire and a conventional wire. The latter has a larger size and a twisted wire form.

Treat thicker plastic coatings as wasted space. Although you can use "regular wire" because if you can't find the source of the "electromagnetic" wire, this is an experiment

The insulation of the magnet wire is very special, and the ordinary copper wire cannot work normally.

Sometimes it is classified according to its nature of use, such as self-adhesive magnetic wire, antifreeze, and enameled wire. Finally, I suggest you choose the enameled wire of a professional enameled wire manufacturer, such as, all enameled wires should be guaranteed by the manufacturer:

C) Professional technical support and timely after-sales service.

D) Free samples for your testing.

E) Longer quality guarantee period, we will compensate you for any quality problems. You can visit to discuss enameled wire in detail.