The forest king 30 ton log splitter processes the branches into wood chips, which wastes the energy that can be used by the recycling system, but this problem is solved with the emergence of the branch shredder. The branch crusher equipment is divided into large, medium and small models. It is a professional crushing equipment for crushing waste dry and wet branches, leaves, branches and...

The log splitter 25 ton is widely used in the fields of construction and municipal construction that meet the needs of sand and gravel aggregates. However, many factors may cause equipment wear or work efficiency during use. How do we maintain it?First of all, the bearing is the part that is more susceptible to wear, which will reduce the working efficiency of the equipment. The bearing is...

Performance Built Log Splitter will inevitably have some failures during normal use, so when the equipment fails, it needs to be disassembled for maintenance, but when it is disassembled, it is often caused by incorrect methods. If the equipment is more severely damaged, how should the equipment be repaired when it is being repaired?　　1. We need to mark all parts when disassembling, so that the...

With the rapid development of the city, more and more trees decorate our city, providing people with shade and coolness. However, these trees need to be built regularly. The disordered branches not only affect the beauty, but also need to cut off the excess weak branches and leaves, leaving the strong ones to continue to rise, but also to eliminate the weak and stay strong, so that the plants...

  1 The humidity of the wood material will affect the output of Chipper Shredder. Normally, the freshly harvested wood needs to be exposed to the sun for 3-5 days to reach the best effect. The wood should be as straight as possible. The bent wood is processed after straightening. Pay attention to check the hammer bolts of Chipper Shredder. If they are loose, tighten them immediately. When...

  Under normal conditions of use, the feeding and discharging of the Rapid Splitter are proportional. As we all know, the feeding situation of the Rapid Splitter is controlled manually, but the discharging cannot be controlled manually, which causes some Rapid Splitter to discharge. The material is not ideal. If the output of the equipment is not ideal, the profit cannot be...

　　 Chipper Shredder manufacturers can crush wood with a moisture content of less than 18%, but this year's domestic climate is strongly affected by the El Nino phenomenon. Most provinces in the south and north had more rainfall than in previous years, which affected the normal production of Chipper Shredder. 　　 After strong convective weather, a large number of branches and waste wood are...

  Petrol Log Splitter allows wood to be crushed at a faster rate. It is suitable for many industries. The production of plywood and dry fiberboard are made of wood crushed by Petrol Log Splitter. It is environmentally friendly and recycled waste scraps. . At the same time, environmental protection has increased the protection of forest resources, and the continuous pursuit of huge...

Petrol Log Splitter is a kind of crushing equipment whose rotor adjusts and rotates. Its crushing forms are mainly blow and collision. When the material to be crushed enters the crusher, it is hit by a certain rotor and becomes fragments. These fragments hit the inner wall of the crusher at a high speed or collide with each other, or hit the rotor again, and the violent crushing of the...

Chipper Shredderis an advanced fine crushing equipment. This series of products are carefully developed based on the advantages of various crushers and fully utilize the theories of impact, shear, mutual impact, and grinding.2. Chipper Shredder is mainly used for processing pine wood, miscellaneous wood, poplar wood, fir, raw bamboo, furniture factory scraps and other materials, and is more...