1 Housing cleaning

Wipe and clean the outside of the case at least once a month: pay attention to cut off the power supply, wipe with a clean, soft, slightly damp cloth soaked in disinfectant, and prevent liquid from penetrating into the gap of the case.

2 Clean the filter

The cleaning and replacement of the filter screen is very important to protect the compressor and molecular sieve and prolong the service life of the machine. Please clean or replace it in time.

Note: Do not turn on the oxygen concentrator without installing the filter.

3 Cleaning of the filter screen of the oxygen generator

Disassembly: 1. The inner filter of the primary filter is cleaned every two weeks. (They are all at the bottom of the oxygen generator, and the long one near the outside can be pulled out from the bottom, and the other wider one can be pulled out from the bottom in parallel.) 2. The inner filter of the secondary filter should be cleaned every month. once. First, open the storage box cover (note: the upper opening angle should not exceed 90 degrees, so as not to break and unscrew the screws), take out the transfer box, and unscrew the filter core. Secondly, the secondary filter screen determines the actual cleaning time according to the actual use time and environmental impact. If the filter element is black, it should be cleaned or replaced immediately, regardless of the length of use.

Cleaning: first clean with light detergent, and rinse with clean water. It must be dry before installing it on the machine.

Ningbo Yinyu Purification Technology Co., Ltd. is a Hospital Oxygen Generator Factory and Household And Office Air Purifier and other products, welcome to visit our official website.