Tips to Help Your Brake Pads Last Longer

Whether you want to save money or you want to make sure you brake pads last longer, there are a few tips you should consider. In addition to following a few easy maintenance steps, you should also avoid using a vehicle with bad brakes.

Bleeding and flushing

Performing a brake flush is a great way to keep your brake pedal feeling like new. Over time, your brake fluid becomes contaminated and degraded. It can also boil after a track day, so it is important to regularly flush it. It is a simple task, but it will help to know the right way to perform it.

First, check the owner's manual for instructions on bleeding your brakes like Endurable disc Brake pads. You may need more tools than just a jack and a syringe. A jack stand will help you lift your vehicle so you can gain access to the bleed screws. You'll also need a cinder block or other prop to make your car stable.

Once you've jacked up your car, use a syringe or a turkey baster to draw out all of the old brake fluid from your master cylinder reservoir. Place a catch container over the bleeder screw, so that any air that escapes will be trapped there. This will prevent it from re-entering your caliper.

Source:https://i.pinimg.com

Avoiding emergency braking

Having a good braking system is important for safety. In fact, it's one of the first things learned in driver's ed. In fact, Mercedes-Benz found that skilled drivers could save up to 10 percent of their stopping distance with a good braking system.

You may want to avoid emergency braking to keep your brake pads on the road for longer. When you use an emergency braking method, you can lose control of your vehicle and cause damage to your car. In addition, using an emergency braking technique in a rainy or snowy situation can cause you to lose control of your vehicle.

You should know how to brake safely, especially if you are a vulnerable road user. This includes pedestrians, cyclists, and motorcyclists. You should also pay attention to the traffic ahead of you. This way, you can adjust your speed to match the flow of the traffic, and avoid tailgating or heavy braking.

Source:https://i.pinimg.com

Avoiding driving with both feet on your pedals

Pedal application errors have been known to cause crashes, but the research found no one knows exactly how. In an effort to learn more about the cause of misapplications, the National Highway Traffic Safety Administration (NHTSA) conducted studies involving drivers, vehicles with Low-metallic ceamic brake pad and test tracks. Researchers used a variety of devices to measure various aspects of driver performance, including cognitive, visual and tactile skills. The results show that the largest number of crashes are attributed to distraction, while the smallest number are caused by inexperience or faulty brakes. In addition, drivers should be aware that braking too hard can cause premature wear to the brake pads.

The best way to avoid causing a misapplication is to make sure to bleed your brakes every two years. This will help you keep your brakes squeaky clean, and it will also save you a few bucks on gas.

Avoiding driving at high speeds

Changing your driving style can extend the life of your brake pads. By lowering the amount of times you need to apply the brakes, you can also save money on gas.

When you're driving at high speeds, your brakes work harder than they need to. Your brake pads wear out faster because they are being constantly stressed. You can extend the lifespan of your brakes by driving defensively.

A good rule of thumb is to not use your brakes until you see the crest of a hill. Your brakes are weakened by being overloaded, and it's not worth the risk. If you must stop suddenly, use engine braking instead. This type of braking involves removing your foot from the accelerator pedal.

You should also keep your speed below 120 kph when you're driving on the freeway. This will minimize the risk of a crash. However, you should also keep your eyes on the road to avoid getting too close to other vehicles. You can also coast until you reach the slowest possible speed, and then re-apply the brakes when you're ready. This will minimize the damage to your brakes.

Proper tire pressure

Optimal tire pressure is a very important factor in ensuring the safety of your tires and your car with Premium Ceramic disc brake pads. It is one of the best ways to ensure the long life of your tires and it can also help you get better fuel economy.

Incorrect tire inflation can cause rapid or irregular wear, poor breaking, and internal damage to your tires. Proper tire inflation can help improve your brake pads' life.

To properly inflate your tires, you should follow the manufacturer's specifications. You can find the tire's recommended air pressure in your vehicle owner's manual or on your car's placard.

Ideally, you should inflate your tires to 30 to 35 PSI. This is the pressure that can help you achieve a smooth ride and maximize your handling.