swing bearing excavator Slewing Bearing With Internal Gear

Before installing the excavator slewing bearing, carefully check whether there is any bump damage during transportation. If there is, there will be an abnormal noise. If this happens, please contact our after-sales service department in time. In addition, it is also necessary to consider whether the operation is invalid due to the cold weather. If the grease in the raceway is viscous and can be operated after applying force, it can be used normally. Operation is not flexible after installation. It may be that the mounting surface of the main engine and the mounting surface of the slewing bearing do not cooperate well, resulting in that the axial clearance of the slewing bearing after installation cannot compensate for the deformation of the slewing bearing, the slewing bearing is in a state of negative clearance, and the rolling elements running in the raceway are sometimes accompanied by abnormal noise. , or the large and small gears are not meshed well, or the large and small gears are stuck with foreign objects.Get more news about Swing Bearing,you can vist our website!
Improvement measures for large swing of excavator
1) Appropriately reduce the bearing clearance, especially the axial clearance.
2) Control the shape of the bearing raceway, especially the ovality.
3) Strictly control the surface hardness and quenching depth of the bearing raceway to prevent the surface hardness from being too low and the depth being too shallow.
4) Appropriately increase the quenching and tempering hardness of the bearing base material.
5) Other factors.
After using for a period of time, it is normal for the excavator to oscillate relatively large due to the fixed plastic deformation of the bearing raceway and the increase of the clearance; however, comprehensive control of all the above possible factors can alleviate the later period of use to a certain extent. Swing bigger problem.