The use of flexible LED strip lights is rapidly rising in modern lighting design around the world. Architects and lighting designers are implementing LED strip lights into residential, commercial, and industrial projects at an increasing rate. This is due to an increase in efficiency, color options, brightness, and ease of installation. A homeowner can now design like a lighting professional with a complete lighting kit and an hour or two. To get more news about led bar decor, you can visit htj-led.com official website.

There are many options on the market for LED strip lights (also called LED tape lights or LED ribbon lights) and there is no clear-cut standard for how to choose LED strip lights. We have created this guide to educate experts and newcomers alike. Lumen is the measurement of brightness as perceived to the human eye. Because of incandescent lighting, we are all accustomed to using watts to measure the brightness of light. Today, we use lumen. Lumen is the most important variable when choosing which LED strip light you need to look at. When comparing lumen output from strip to strip, note that there are different ways of saying the same thing.  The questions you should be asking is “Lumens per what? Per foot, meter, or reel? How long is the reel?”

Different projects require a certain amount of brightness to achieve a desired look. Our advice is to always go brighter than needed and add a dimmer. Running your LEDs below their full power and brightness can also increase lifespan. CCT (Correlated Color Temperature) refers to the color temperature of light, measured in degrees Kelvin (K). The temperature rating directly affects what the white light will look like; it ranges from cool white to warm white. For instance, a light source that has a 2000 – 3000 K rating is seen as, what we call, warm white light. Warm white light looks very orange and/or yellow. When increasing the degrees Kelvin, the color will change from yellow to yellowish white to white and then a bluish white (which is the coolest white). Although the varying temperatures have different names, it should not be confused with actual colors such as red, green, or purple. CCT is specific to white light or rather, the color temperature.

All CCTs are not created equal. You may notice that some lights that are "cool white" may not look pure white. They may give off a greenish, purplish, or bluish hue to them. This is because the LEDs have been selected from a presorted pile (bin) that is far from true white, in order to save money. It is important to ask the manufacturer of the LED strips how they BIN their LEDs and what their selection process is. Our strips are always selected from the same bin, to make sure every batch is the same and there are no color differences.

Here is an example of the same bedroom under 2700k, 3500k, 4200k, and 6200k lights. Notice how lighting changes the mood and style of the space! The aesthetic, function, or emotion of a space may change depending on the color temperature you use. Choosing the right color temperature is not difficult, but make sure you take into consideration the colors of your walls, the floor, what you will be illuminating, what activities will be completed in the area, or if there are local regulations telling you what CCT to use (Like California's Title 24).