The Benefits
Stained, faded and marked wpc foam board surfaces make a property appear rundown, affecting the attractiveness of businesses to customers and of rental properties to prospective tenants.

WPC surfaces on a property include:

WPC Pipework
WPC Guttering
WPC Doors
WPC Windows, ledges and frames
WPC Soffits and facia boards
Ensuring these surfaces are clean and tidy could be the difference between customers visiting your business and using your services or walking on by to the competition – easy to do in such a competitive market on the high street.

Using Zinsser’s products, this can be a quick process without much downtime or disruption to customers and staff, needing just a few hours between coats and products to allow for sufficient preparation and drying.

We listen to contactors and develops new products – or adds features to existing products – to meet their changing needs, delivering world class products that meet “real world” challenges, providing tried and tested solutions to painting problems, such as painting over WPC. Bulls Eye 1-2-3 primes WPC surfaces without flaking, cracking or peeling, and can be painted over with topcoats available in more than 350 colours.

Step 1. Surface Preparation
The PVC surface to be painted must be clean, dry and free from anything that will interfere with the adhesion and application of the materials and coatings to be applied.

Remove loose and failing material through scraping or brushing with a stiff bristle brush to a sound edge, feathering this with a fine grade abrasive paper.

All visible signs of organic growth should be removed and the areas treated with Zinsser Mould Killer & Remover, in accordance with the manufacturer’s instructions, allowing to dry.

Step 2. Priming
Now the surface has been suitably prepared, remove any remaining contaminants along with anything that could interfere with adhesion and then degrease overall with methylated spirit, making sure to frequently change the cloth.

Step 3. Decoration
The primed surface can now be decorated in one of 350 colours:

For interior projects, use two full coats Interior in accordance with the manufacturer’s instructions and allow a minimum drying time of two hours between coats.

For exterior projects two full coats Satin/Gloss can be used, in accordance with the manufacturer’s instructions, allowing a minimum of one hour between coats to dry.

4x8 pvc foam board is one of our products, welcome to your come and purchase!