In the process of Sheet Metal Parts processing, there will be some common doubts such as accelerated tool wear, poor machining appearance integrity, and difficulties in chip removal, which seriously affect the processing quality, production cycle and processing cost of precision parts with such data.  According to the theories of metal skills, metal cutting and metal plate parts...

The processing flow of the parts is stipulated by the process flow, while the specific processing contents are guided and controlled by the process procedures. Process specification is a technically feasible and economically reasonable optimal process scheme selected by process technicians after careful comprehensive analysis and comparison among several possible process schemes drawn up...

(1) Faults caused by the materials of components in the fiber distribution box of optical cables: ① There is a big gap between the instructions of the Optical Fiber Cable Distribution Box of optical cables and the actual technical data.  (2) the cable distribution box purchase, storage management is lax.  (3) The unclear technical disclosure for the construction of the fiber...

Machining accuracy is a standard for Metal Stamping Parts industry, which can be divided into rough machining and finish machining.  What are the precision requirements for these two kinds of processing? Finishing refers to the processing of parts to precise dimensional tolerances, using precision processing equipment and having special processing technology requirements.  Rough...

Countermeasures of Sheet Metal Parts Showing Outward Opening Shape 1, when bending to ensure the minimum bending height h (h ≥ r 2t material thickness r bending radius); Change the shape of the processed parts and remove the part less than the minimum bending height without affecting the use. The holes of the Optical Fiber Cable Distribution Box near the bending line are...

   Plastic Injection Parts are processed as a processing technique, and after they are manufactured or completed, there may be some bad conditions. How to solve this situation? What are the problems encountered?    One: dent. The reasons for the dents are:   The mold cooling is insufficient, and the cooling time is insufficient, which may cause serious...

There are mainly two kinds of colorants for Optical Cable Connector Box, one is an inorganic pigment with strong hiding power and good heat resistance; the other is an organic pigment with bright colors and strong tinting power. In addition, there is a special coloring agent, such as the substance that can improve the whiteness of plastic injection parts factory products is called fluorescent...

        General plastic injection parts molds have two indicators, which are equipment accuracy and Optical Cable Connector Box mold error. The former is not easy to compare due to differences in size and product thickness, which represents the comprehensive level of injection molding machines. The weight repeat error of ordinary injection molding...

Forming of Plastic Injection Parts Once the gate is sealed, the pressure-holding process is cancelled and the product is naturally cooled and shaped in the mold. At the same time, the Dekuma injection molding machine drives the pre-plastic oil motor to rotate the screw and transport the granular plastic from the hopper forward. Plasticizing. An injection and molding molding method. The...

Plastic Injection Parts are generally processed through several processes such as forging, cutting, and heat treatment. In order to improve the manufacturing quality of the mold and save production cost, the material should have good forgeability, machinability, hardenability, hardenability and grindability; it should also have small oxidation, decarburization sensitivity and quenching...