Our oil resistance V-Belts are often one of the best-selling products. Rubber belts are afraid of corrosion, so we have produced oil-resistant V-belts, high-temperature V-belts and other characteristic rubber belts, hoping to extend their service life. The following describes the design and concept of the V-belt:
(1) V-belts are usually endless belts. To facilitate installation, the shaft spacing and pre-tightening force should be adjusted. For a drive without a tensioner, the bearing position of one of the shafts should be able to move along the length of the belt.
(2) The transmission structure should facilitate the installation and replacement of V-belts.
(3) For horizontal or nearly horizontal belt drive, the tight side of the belt should be on the bottom and the loose side on the top, which can increase the wrap angle of the small pulley.
(4) When multiple V-belts are driven, in order to avoid uneven load distribution of each V-belt, the length of the V-belt on the same pulley should be matched. All replacements must be replaced at the same time.
(5) The use of tensioning wheel drive will increase the number of belt bending and shorten the life of the belt.
(6) In the transmission device, the flatness of the center plane of the grooves corresponding to the two pulleys should be less than 0.002a (a---axis spacing); the parallelism of the axis of the pulleys should be less than 0.006a.
(7) Ordinary V-belt and narrow V-belt shall not be mixed in the same transmission device.
V-belt model selection: According to the design power p of the belt drive and the speed of the small pulley n, the belt type is initially selected according to the figure. Whether the selected belt type meets the standard, the space location requirements of the transmission and the number of belts should be considered before the final determine.
If you want to know more details about the V-belt, you can search on our official website, such as: high temperature resistance V-Belt , welcome your consultation and contact.
Поиск
Категории
- Economy
- Blog
- Статья
- Art
- Causes
- Crafts
- Dance
- Food and Drinks
- Movies & Films
- Health & Fitness
- Software & Games
- Home & Gardening
- Literature
- Music
- Networking
- Другое
- Party
- Religion
- Shopping & e-Commerce
- Sports
- Theater
- Wellness
- Nepal & Nepalese
- South-east Asia
- e-Sathi
- Technology
- Politics & Politicians
- Photography
- Business
- Develops
- Information Technology
- News
- Animal and Pets
- Climate change & Global Warming
- Travel & Tourism
- Educations
Больше
Brazil Tire market report: size, growth, challenges, opportunities, and Covid-19 impact and forecast through 2027
MarkNtel Advisors offer a thorough, accurate, dependable, and unbiased research study on the...
How to Find the Tailor for Designing your Suit? GIORGENTI New York
How to Find the Tailor for Designing your Suit?
The suits are the most important part of...
Sex Doctor in Mumbai
Who is a Sexologist?
A few years ago, going to a sexologist was highly taboo. Nobody would ever...
Nike Jordan 1 Jordan Shoes
JordansYeezyJordan ShoesAdidas UKAir Jordan 4Air Jordan 1Jordan 1Air JordansNike Air...
Plastic Labels
Manufacturers of plastic label paper point out that the adhesion of the top and bottom edges...